cbegf
Nov 13, 09:18 PM
i dont have a boot floppy can i make one from a pc or do you know where i can get one?
and how do you boot from a floppy? sorry for all the questions i havnt touched a mac since this thing worked.
and how do you boot from a floppy? sorry for all the questions i havnt touched a mac since this thing worked.
Angelus520
Sep 23, 08:38 AM
I just unpacked my 20" iMac last night after work and all I can say is, "OMG, it's big!" You don't really notice it in the store next to all the open space and the other computers, but it's definitely bigger than I expected. But it's SO awesome! Before I even plugged it in, I stuck an extra 1GB of RAM in it and then transferred all my files over from my PowerBook. That's SO slick.
Then I went through all the system updates and played around with some Photoshop and InDesign files and they opened nice and quick and looked gorgeous on the screen.
I also bought an iLugger bag since I'll be using it for DJing on occasion with tomorrow being the first time. I know it's a bit big for that but I wanted to upgrade from my PowerBook and didn't see the need to get a new one until the next major revision. The iMac will tide me over just fine.
It's hard to go back to my now little PowerBook's 15" screen after gazing at the vast amount of real estate on the iMac. Definitely a sweet upgrade.
Then I went through all the system updates and played around with some Photoshop and InDesign files and they opened nice and quick and looked gorgeous on the screen.
I also bought an iLugger bag since I'll be using it for DJing on occasion with tomorrow being the first time. I know it's a bit big for that but I wanted to upgrade from my PowerBook and didn't see the need to get a new one until the next major revision. The iMac will tide me over just fine.
It's hard to go back to my now little PowerBook's 15" screen after gazing at the vast amount of real estate on the iMac. Definitely a sweet upgrade.
Mr. Retrofire
Apr 11, 10:45 AM
Also I even tried restoring twice into earlier OS X Lion backups but that didn't even work :/ :(
I had a similar problem with Lion DP1. I erased the HD with Apples Disk Utility and reinstalled Lion DP1. However, the safe boot works usually in the final versions of Mac OS X.
I had a similar problem with Lion DP1. I erased the HD with Apples Disk Utility and reinstalled Lion DP1. However, the safe boot works usually in the final versions of Mac OS X.
nicname
Apr 14, 10:42 PM
are they both made of the same material? i tried my friends incase and it slips in and out of my pocket well. Is this more rubbery? or the same material as the incase
more...
iSaint
Oct 18, 06:03 AM
Hah, that was really cool! Well done.
bousozoku
Jan 1, 09:06 PM
I'm my favourite Mac application developer. :D
Otherwise, I'd have to say Ryan Gordon, Brad Oliver, or The Mozilla Group. They're the best.
I use a lot of applications but I can't say that any of them work particularly well on Mac OS X still. Macromedia and Adobe need to forget their past and make things work.
Otherwise, I'd have to say Ryan Gordon, Brad Oliver, or The Mozilla Group. They're the best.
I use a lot of applications but I can't say that any of them work particularly well on Mac OS X still. Macromedia and Adobe need to forget their past and make things work.
more...
CubusX
Aug 3, 10:30 AM
This does look like iOS4 is turning into Apple's Vista. I've begun noticing odd quirks with my iPhone 4. Frequently, the screen refuses to shift into landscape or portrait mode when I turn it. The only thing that seems to fix the problem is a re-boot of the phone. Reception is still wonky. In the exact same location it will shift from 5 bars of 3G to 1 bar of EDGE, then 1 bar of 3G and then to 3 bars of EDGE. I've had several bizarre syncing problems when either iTunes or iPhoto reported simply, "An error has occurred."
When it works, it's great. But it certainly has been more finicky than my old 3G, which was rock-solid.
I have noticed this as well, a reboot usually helps. It is very annoying though.
Other things I have noticed:
1) The screen tends to take time to come one (once in a while) when the power button is pressed (when in sleep mode).
2) The color on the Calendar's is incorrectly sync'ed from my MacBook Pro.
As of right that is all I have noticed, it is a simple fix through the software. Hopefully it comes along quick.
When it works, it's great. But it certainly has been more finicky than my old 3G, which was rock-solid.
I have noticed this as well, a reboot usually helps. It is very annoying though.
Other things I have noticed:
1) The screen tends to take time to come one (once in a while) when the power button is pressed (when in sleep mode).
2) The color on the Calendar's is incorrectly sync'ed from my MacBook Pro.
As of right that is all I have noticed, it is a simple fix through the software. Hopefully it comes along quick.
d4nn0
Dec 16, 04:51 PM
http://www.ss64.com/osx/
maybe you will find a bit more functionality here :D
http://www.macdevcenter.com/pub/a/mac/2001/12/14/terminal_one.html
this is helpful if you've never used terminal before
maybe you will find a bit more functionality here :D
http://www.macdevcenter.com/pub/a/mac/2001/12/14/terminal_one.html
this is helpful if you've never used terminal before
more...
dime21
Mar 29, 08:54 AM
I wish someone would do a native OSX build of Putty. I'm pretty surprised it hasn't been done. Doesn't seem like it would even take much effort if you have the original linux or BSD source code as a starting point.
Curse
Apr 28, 08:20 PM
I should add that I used the install disks that came with the computer.
more...
trainguy77
Nov 12, 10:02 AM
So, where did you get the Beta from? I looked at the download/beta section of Stanford, but didn't see it.
Its intel only. However, to get it you have to request to join the beta team in the forums.
Its intel only. However, to get it you have to request to join the beta team in the forums.
boogieman
Sep 28, 04:35 PM
So when is aperture 1.5 coming me wife is driving me crazy for it!!!
more...
shyam09
May 5, 12:36 AM
in december i managed to buy a booq taipan [i believe that's what it was called] and although it isn't the vyper i am def. pleased with the quality and durability. [its a sleeve btw]... i have to say booq products are no.1, very well made, and well worth the money. Booq Vyper to the MAXX!!!
tablo13
Feb 10, 04:49 PM
My friend has an iPod touch 2g 8GB with iOS 4.2.1, and his iPod's setting says it has 4.9GB of space left in settings but loader would not install Cydia, and would say "disk space needed". But the Cydia icon is already in the springboard, and doesn't launch when tapped. He's going to try redsn0w, but is there a way to fix this?
more...
Nereus
Dec 16, 05:43 PM
Perhaps you should try removing the file com.apple.airport.preferences.plist from the folder you find it in. Perhaps some of the preferences are corrupt.
Also, I'd check to make sure the antenna is plugged in correctly. :)
Thanks! How do I check that the antenna is plugged in correctly?
Also, I'd check to make sure the antenna is plugged in correctly. :)
Thanks! How do I check that the antenna is plugged in correctly?
renewed
Sep 14, 09:57 PM
I threw it back where it came from.
Just to make you peta people happy xD
Thank you.
Just to make you peta people happy xD
Thank you.
more...
goMac
May 1, 03:39 AM
5870.
A 5870 is (on paper) twice as fast as one 5770. Two 5770s would be even in theory, but crossfire mode always has a speed hit, so the 5870 would beat two 5770s in crossfire.
Plus you have to deal with a more "exotic" configuration with crossfire.
A 5870 is (on paper) twice as fast as one 5770. Two 5770s would be even in theory, but crossfire mode always has a speed hit, so the 5870 would beat two 5770s in crossfire.
Plus you have to deal with a more "exotic" configuration with crossfire.
elders
May 2, 10:15 AM
jailbroke my ipod touch 3g mc model (8gb) 3.1.3 with spirit. Tried system restore on itunes and downloading firmware from felixbruns and it still wont restore. It's in full working condition but I need to unjailbreak it so I can sell it because im getting an iphone. Need help, thanks.
GGJstudios
Apr 21, 12:48 PM
That doesn't happen for me. The scrolling continues as it should, even during the momentum phase of the scroll.
That's the way it used to be for me. I don't know when it broke or what might have caused it.
That's the way it used to be for me. I don't know when it broke or what might have caused it.
aquajet
Dec 6, 01:28 PM
If you do decide to swap out the logicboard from a newer/faster iMac, keep in mind there are two 500mhz boards out there...the DV SE which has the older 8mb Rage chip and the later models which have the 16mb chip. I'd look for a 600 or 700mhz board to be safe.
raymanrox1
Apr 7, 06:53 AM
Hi guys,
I unfortunately am unable to press the option key while starting up as its locked and I was wondering whether theres anyway of allowing the disk to be ejected (after the windows installation) from windows without having to switch back to mac?
Thanks :)
I unfortunately am unable to press the option key while starting up as its locked and I was wondering whether theres anyway of allowing the disk to be ejected (after the windows installation) from windows without having to switch back to mac?
Thanks :)
snaky69
May 3, 11:26 AM
It is the unibody MacBook. Will it hurt anything to try installing it?
I believe your macbook uses ddr2 memory,whereas the newer MBP's use DDR3. There is difference in voltage requirements for those two standards. You can install it in the macbook, it just won't boot, but you won't damage anything.
Why are you trying to do this in the first place?
I believe your macbook uses ddr2 memory,whereas the newer MBP's use DDR3. There is difference in voltage requirements for those two standards. You can install it in the macbook, it just won't boot, but you won't damage anything.
Why are you trying to do this in the first place?
paolo-
Jan 6, 09:00 PM
How are you plugging them in? If you can get the guitar to work, every thing else should. You should plug the line out from your keyboard to the audio inputs of your tascam. For the mic, it should go into the mic in.
As for returning it, it's not a bad idea. It sounds as though you just plugged things wrong if you can get it to record your guitar. But tascam interfaces are a pain in the ass. Really, I had the L version of the interface and it wouldn't work when I wanted it to. I had to reinstall the drivers countless times, plug and unplug it, restart my computer. And apparently, I'm not the only one to get all of those problem, there's a thread about in the board. They never release new drivers and usually the updates aren't that better. I just hope I can save you the trouble.
As for returning it, it's not a bad idea. It sounds as though you just plugged things wrong if you can get it to record your guitar. But tascam interfaces are a pain in the ass. Really, I had the L version of the interface and it wouldn't work when I wanted it to. I had to reinstall the drivers countless times, plug and unplug it, restart my computer. And apparently, I'm not the only one to get all of those problem, there's a thread about in the board. They never release new drivers and usually the updates aren't that better. I just hope I can save you the trouble.
karsten
Nov 20, 04:10 PM
well i looked around the f@h website a bit, and found instructions for running the windows client through wine on linux. they are here: http://foldingforum.org/viewtopic.php?p=158848#p158848
so i figured i'd try to see if that could happen for osx.
i installed winebottler from http://winebottler.kronenberg.org/,
the os x cuda toolkit from http://developer.nvidia.com/object/cuda_3_2_downloads.html
then the gpu3 folding client from http://www.stanford.edu/~friedrim/.Folding@home-Win32-GPU_Vista-631.zip
ran the client in wine but i keep getting "Gpu species not recognized." errors from the folding client. i see theres a new version of the client available, i'll try that. thinking either that or the os x nvidia drivers are enough different from the windows ones that the client can't access it properly. this is on a 2009 mp with the gt120 which is fermi i think. tried both fermi and non- in the client but both gave that error. play around with it and see maybe what you all find:)
EDIT 1: I JUST TRIED THE NEWEST VERSION OF THE CLIENT, 6.40r1 AND IT NOW APPEARS TO DETECT THE GRAPHICS CARD! it sees the gt120 as Gpu type=3 species=20. the client downloads the core then it crashes when it tries to run with Calling '.\FahCore_15.exe -dir work/ -suffix 01 -nice 19 -checkpoint 15 -verbose -lifeline 63 -version 641'
[22:17:18] CoreStatus = C0000135 (-1073741515)
[22:17:18] Client-core communications error: ERROR 0xc0000135
[22:17:18] This is a sign of more serious problems, shutting down.
will continue to try to get this to work :)
EDIT 2: I missed the part to install some wrappers. going to see if that helps. apparently from http://foldingforum.org/viewtopic.php?f=59&t=16783 someone said gpu2 ran on os x so maybe it's possible
so i figured i'd try to see if that could happen for osx.
i installed winebottler from http://winebottler.kronenberg.org/,
the os x cuda toolkit from http://developer.nvidia.com/object/cuda_3_2_downloads.html
then the gpu3 folding client from http://www.stanford.edu/~friedrim/.Folding@home-Win32-GPU_Vista-631.zip
ran the client in wine but i keep getting "Gpu species not recognized." errors from the folding client. i see theres a new version of the client available, i'll try that. thinking either that or the os x nvidia drivers are enough different from the windows ones that the client can't access it properly. this is on a 2009 mp with the gt120 which is fermi i think. tried both fermi and non- in the client but both gave that error. play around with it and see maybe what you all find:)
EDIT 1: I JUST TRIED THE NEWEST VERSION OF THE CLIENT, 6.40r1 AND IT NOW APPEARS TO DETECT THE GRAPHICS CARD! it sees the gt120 as Gpu type=3 species=20. the client downloads the core then it crashes when it tries to run with Calling '.\FahCore_15.exe -dir work/ -suffix 01 -nice 19 -checkpoint 15 -verbose -lifeline 63 -version 641'
[22:17:18] CoreStatus = C0000135 (-1073741515)
[22:17:18] Client-core communications error: ERROR 0xc0000135
[22:17:18] This is a sign of more serious problems, shutting down.
will continue to try to get this to work :)
EDIT 2: I missed the part to install some wrappers. going to see if that helps. apparently from http://foldingforum.org/viewtopic.php?f=59&t=16783 someone said gpu2 ran on os x so maybe it's possible
No comments:
Post a Comment